Cesta bratstva in enotnosti 039,
8330 Metlika, Slovenia

3D Wooden Wall Panels – Old Oak 6/8 mm
3D Wooden Wall Panels – Old Oak 6/8 mm - Image 2
3D Wooden Wall Panels – Old Oak 6/8 mm - Image 3
3D Wooden Wall Panels – Old Oak 6/8 mm - Image 4
3D Wooden Wall Panels – Old Oak 6/8 mm - Image 5
3D Wooden Wall Panels – Old Oak 6/8 mm - Image 6
3D Wooden Wall Panels – Old Oak 6/8 mm - Image 7
3D Wooden Wall Panels – Old Oak 6/8 mm - Image 8

3D Wooden Wall Panels – Old Oak 6/8 mm

1 review
In Stock.      Ships within 2-3 months.

The Sun-Burned wooden planks are sourced from Hundred-Years-Old Reclaimed construction beams.

  • Unique 3D and luxury look. Unique 3D effect for wall design with wooden panels different thickness.
  • Very simple installation. With our innovative assembly adhesive, simple instructions and minimal effort, you’ll be transforming your space in no time. It can be mounted on any surface. It is the easiest and fastest way to decorate space. You can also use any parquet adhesive for installation.
  • Eco-friendly. Natural Reclaimed oak and Eco-friendly oil. And these panels are good for reducing the sounds in any space.
  • 40 % guaranteed savings on heating and cooling the space.
  • Packaging 1 m2. Weight 13kg. 10 oak wood planks:
    • 5x oak wood planks 1000 x 100 x 6 mm
    • 5x oak wood planks 1000 x 100 x 8 mm

We understand that it is difficult for our clients to select interior finishes over the Internet. Therefore, we offer our clients to order samples of our panels. Sample cost without delivery is €30. The samples are complete 1-4 panels (depending on model) to ensure you are making the right choice. Samples are available for all panels in the 3D panels category.
If, after purchasing this sample, you will buy any of our panels for more than €150, the total panels price will be reduced for you by the cost of the previously purchased sample. You will receive a coupon with this discount automatically after purchasing this Sample.

€110,00/m2


LUX LES DOM DEKOR wood products
LUX LES DOM DEKOR 3D OAK Wall panels are unique. The wooden planks are sourced from hundred-years-old reclaimed construction beams. Thanks to the unique visual appearance of these planks, they are quite popular in rustic interiors and also are greatly combined in modern interiors.

 

The sun-burned planks with their unique tone will greatly complement your living room, office, kitchen as well as restaurant, working space, shopping stores and any other interior space. Old oak has the great brown color variations and as a result, they can be easily used in any design – contemporary or classical, serving modern interior too.

 

The panels are made from natural Reclaimed oak and protected with Eco-friendly oil. Our oak panels are very good at maintaining a comfortable microclimate and are also very good at reducing noise in any room. With our innovative assembly adhesive, simple instructions and minimal effort, you’ll be transforming your space in no time. You can mount these panels on any surface. It is the easiest and fastest way to decorate space. You can also use any parquet adhesive for installation.

 

Wooden walls give any space a pleasant and warm look. Wood has a low thermal conductivity, as a result of which the room heats up or cools down more gradually. Thus, one of the advantages of wood wall coverings is to improve the indoor climate.

 

Why our assembly adhesive?
We understand the importance of convenience and reliability when it comes to installation. That’s why we offer the assembly adhesive, specifically formulated for our 3D wooden wall panels. Here’s why it’s the perfect choice:

  • Strong Adhesion. Our assembly adhesive ensures a secure bond between the panel and the wall, providing peace of mind that your investment is built to last.
  • No Mess, No Fuss. Say goodbye to messy installations and unsightly gaps. Our assembly adhesive offers a clean and seamless application, resulting in a flawless finish every time.
  • Effortless Removal. Need to reposition or remove your panels? Our assembly adhesive allows for easy removal without damaging your walls, making it a convenient choice for renters and homeowners alike.

 

General product description

  • unique 3D look
  • panels made from natural raw materials, Reclaimed oak
  • protected with Eco-friendly oil
  • finished, UV-cured – wooden plank 6/8 thickness for unique 3D look

 

Package contents

  • Content: 1 m2
  • 5x oak wood planks 1000 x 100 x 6 mm
  • 5x oak wood planks 1000 x 100 x 8 mm
  • Weight: 13kg

PLEASE READ THIS PRIOR
to installing LUX LES Dom-Dekor wooden wall panels.

Here we provide step-by-step instructions for installing all of LUX LES Dom-Dekor wooden wall panels. Instructions for each type of product are available to review and print out. In addition to obtaining excellent final results – meaning a fantastic-looking wall – it is important you follow these instructions to ensure that your product is properly protected under our warranty (please see the “WARRANTY” tab).

You can use our assembly adhesive or any type of parquet adhesive to install LUX LES Dom-Dekor wooden wall panels. Please select a parquet adhesive based on all of the following factors – kind of wall finish, paints surface textures or other external factors such as temperature, humidity and chemical constituents of your wall and etc.

Tips. We highly recommend using our innovative assembly adhesive, specially formulated for our 3D wood wall panels.

Installation of our wooden wall panels is not complicated. Except for assembly adhesive and accessories for an assembly adhesive you will also need a few supplies to complete the job.

  • Cutting tools that may be necessary: a utility knife, handsaw, jigsaw, or miter saw.
  • Other tools you may need: a tape measure, 4′ level, straight edge, pencil for marking the wall and a ladder if you are installing above your height, etc.

Tips. Don’t forget to bring your imagination! Our panels can be installed not only horizontally but vertically, diagonally, chevron or in any unique pattern you think of.

ATTENTION!!! Be sure to wear safety glasses and hearing protection when working on your project. Use a respirator when cutting and creating wood dust. For your protection and that of those around your work area, always think about your safety and that of those around you.

For best results, ensure the following!

STEP 1. Prep the Wall Adequately.

Whichever assembly adhesive you use, carefully read its instruction for use and surface preparation.

We recommend:

  • to clean Dirt and Grime before installation of LUX LES Dom-Dekor wooden wall panels.
  • to clean residual grease, grime, mildew, chalked paint or any other type of surface dirt must be cleaned from the surface because these can prevent optimal adhesive bonding.
  • TO MAKE SURE THERE IS NO DUST.
  • to make sure your wall surface is ready for the installation of LUX LES Dom-Dekor wooden wall panels.
  • to make sure that walls are completely dry before applying LUX LES Dom-Dekor wooden wall panels.

This is not a complete list of surface preparation guidelines that is necessary for LUX LES Dom-Dekor wooden wall panels installation. Read carefully assembly adhesive instructions for use and surface preparation.

Before you begin condition (acclimate) your panels to the room. With all panels in the interior space where they will be installed, stand them individually along the long edge or lay them flat with wood sticks spaced between them so that air circulates around each panel. Let stand for at least 24 hours if installation is above grade and at least 48 hours if installation is below grade level. For all below grade applications, always use a vapor barrier between the outside walls and the studs. Remove all trim. Turn off the electricity before removing all receptacle covers. Once the panels have been acclimated to the room, place your paneling around the room in an attractive arrangement of grain, pattern or color. Previewing this way is especially important when you use panels with a definite direction in the pattern. Once you have a good aesthetic sequence, number the back of the panels in the order in which they will be attached to the wall.

STEP 2. Measure the Space.

Once clean, it is important to plan out the layout of your decorative wall panels because each home’s dimensions vary so vastly.

Do a Dry Lay. Prior to beginning panel application, do a dry lay of panels on the floor of an open area. Use panels from several cartons of LUX LES Dom-Dekor wooden wall panels and arrange them according to your desired aesthetic.

Measure the space. Measure the space to calculate exactly how many panels you will require. Figure out how many boards you need.

Calculate how many boards high you can go and whether any boards will need to be cut down (along the long side to reduce the height of the board). Think through where you would want the cut boards – bottom, top, or middle of your layout.

To ensure a level installation, mark the width of the panel from the floorboard vertically up along the wall. Do this on the bottom left and bottom right of the wall. Use a level to draw a straight line or snap a chalk line between these marks. Use this as your guideline, applying the panel flush with the chalk line. Start your installation in the corner that you see first when entering the room or work your way across the wall, from left to right.

STEP 3. Place panels, cutting as you go.

Once you have got your wall planned and leveled, now you can start placing the panels in the layout you find most aesthetically pleasing. We recommend a staggered panel layout with most panel designs to create an organic flow that feels natural.

Tips. In order to stagger the panels, cut a panel down to two thirds its size and use it as your starting piece on the second row. Continue across the wall using full-length panels. Start row three with the one-third piece you have from before. Continue with full-size panels.

Tips. More Fun with a Partner. Installation of LUX LES Dom-Dekor wooden wall panels is much easier if you have a second person to help, particularly in the process of establishing a completely level starting line (first row of panels you install). If working alone, it is advisable to tap 1½” finish nails halfway into the wall, every 100mm along a 100% level starting line, to help position the panels accurately when installing horizontally.

Begin placing your panels by applying the assembly adhesive to them as directed in the instructions for your assembly adhesive. Make sure you don’t jump around and skip a row when placing the panels, as they are designed to be precisely interlocked together. Chances are, the panels will require a slight trim to completely cover your wall. You can cut the panels horizontally or vertically to fit the required area.

Once you are certain the adhesive is firmly in place go ahead and continue with the rest of your installation. Place your second board next to it. You are getting the idea!

Tips. Give it a couple of hours after your first board to make sure the finish of your wall does not reject the adhesive.

CUT YOUR BOARDS TO ENSURE GOOD FIT.

Congrats! You have made it to the end of the row. Carefully mark your cut and use a jigsaw, circular or power saw to make a clean cut.

Double-check all measurements before cutting panels. To cut around openings like electrical switches or outlets, turn off the power at the main panel and then remove the cover plate to the switch or outlet. You can wipe lipstick or a crayon around the rim of the box and then press the panel into place to dry fit the panel. As the panel makes contact with the box, an outline will be left on the panel from the lipstick or crayon. Place the face of the panel down and use a jigsaw to cut around the outline. Make sure that the panel opening is resting on the wall and not on the lip of the box. The cover plate will cover any gaps between the box and the opening in the panel.

STEP 4. Enjoy the Process.

Take your time with installation, use care, don’t take shortcuts and appreciate both the installation process as well as your gorgeous finished wall.

Tips. MAKE STRAIGHT LINES. Make sure you are using a level to keep the boards straight.

Check it out. Congrats on your not-so-hard work! Ensure a completely secure bond and smooth surface by patting down your new decorative wall panels, no roller needed. Once your panels are fully secure, feel free to spruce them up with pictures, shelves, and other home accents.

We hope this LUX LES Dom-Dekor wooden wall panel installation guide was helpful! Now you can enjoy the stylish look of your new wall.

STEP 5. SEND US A PICTURE.

We would like to see an image of your installed wooden wall. Post pictures of your wooden wall on Instagram or Facebook and be sure to include #luxlesdomdekor so we see it! We’ll share our favorites with our followers!

Questions remain.
Our knowledgeable customer service team is here to help. Please contact us if you have any additional questions about how to install your LUX LES Dom-Dekor wooden wall panels. We will patiently walk you step by step to ensure your wall panels are installed properly. Simply call us at +38640844057 or email us.

Cleaning Wooden Wall Panels, Furniture and Decor:

  • Besides being beautiful, our LUX LES Dom-Dekor wooden wall panels and furniture are virtually maintenance free. The primary method of cleaning is dusting normally with a clean, dry cloth. Keep in mind that traditional dusting sprays or furniture polishes won’t work on non-porous surfaces, so don’t use them. These products tend to simply sit on top of the surface, as they are never absorbed into the material, resulting in a residue that can detract from the panel’s and furniture’s appearance.
  • As needed, or on a semi-regular basis, damp wipe your wall panels and furniture. Remember never to saturate the panels and furniture- use only slightly damp (thoroughly wrung out) cloths. Wipe from top to bottom, going with the grain to avoid visible streaks. Important: Do not use wax, ammonia-based cleansers, detergents, polishes, abrasive cleaners. These products contain chemicals that can cloud and/or permanently damage the finish of your wooden panels and wooden furniture.
  • We recommend oiling the panels one time in two years to keep the look fresh.

Hanging Pictures and Other Wall Decor:

LUX LES Dom-Dekor wooden wall panels not load-bearing. For hanging pictures and other heavy objects such as televisions, mirrors or sizable artwork, drill clearance holes through the wall plank and mount objects directly to wall studs with screws or nails. Note that when decorating your wall, slight adjustments to cleaning the panels may be necessary. Hang objects wisely so that you can be thorough and adequately maintain the uniform appearance of your LUX LES Dom-Dekor wooden wall panels.

Sunlight:

It’s a good idea to minimize the amount of direct sunlight on your panels to reduce any fading effects.

Our knowledgeable customer service team is here to help. Please contact us if you have any additional questions about how to clean your LUX LES Dom-Dekor wooden wall panels and furniture.

Q & A

Ask a question
There are no questions yet

1 review for 3D Wooden Wall Panels – Old Oak 6/8 mm

5.0
Based on 1 review
5 star
100
100%
4 star
0%
3 star
0%
2 star
0%
1 star
0%
Showing 1 of 1 review (5 star). See all 1 review
  1. English

    Aleks Smirnov –

    The wall panels are of very good quality.
    Fast, responsive and client-oriented company.
    All obligations were fulfilled within the agreed time frame
    Thank you.

Show only reviews in English (1)

Add a review

Your email address will not be published. Required fields are marked *

Related products